Refractory Deck Stone 330 × 985 × 14 mm for Italforni TK

This 330 × 985 × 14 mm refractory deck stone is intended for certain configurations of ITALFORNI TK electric pizza ovens.

It does not correspond to the size of the stone originally fitted. Instead, it forms part of a replacement solution used when the older 485 × 985 × 14 mm stones are no longer available.

This solution keeps the same overall baking surface and the same deck thickness.

Original Deck Configuration

Originally, the refractory deck consists of:

• 2 stones measuring 485 × 985 × 14 mm

The two stones are positioned side by side.

The total width is therefore:

485 + 485 = 970 mm

The complete refractory surface measures:

970 × 985 mm

with a thickness of:

14 mm

Original 485 × 985 × 14 mm Stone No Longer Manufactured

The original 485 × 985 × 14 mm stone is no longer manufactured.

As a result, direct replacement with two new stones of the same size is no longer possible.

The replacement solution therefore consists of dividing the total 970 mm width across three available refractory stones.

Replacement Solution

The new configuration consists of:

The total width remains exactly the same:

330 + 330 + 310 = 970 mm

The length also remains unchanged at 985 mm.

In addition, all three elements retain a thickness of 14 mm.

The total reconstructed surface is therefore:

970 × 985 mm

Original Configuration vs Replacement Solution

The total baking surface therefore remains unchanged.

Only the number of stones changes, from 2 to 3 elements.

Complementary 310 × 985 × 14 mm Stone

To rebuild the complete deck, two 330 × 985 × 14 mm stones must be combined with one 310 × 985 × 14 mm stone.

The complementary stone is available here:

Refractory Deck Stone 310 × 985 × 14 mm for Italforni TK

To replace the original configuration completely, you therefore need:

• 2 × 330 × 985 × 14 mm stones
• 1 × 310 × 985 × 14 mm stone

Italforni TK Compatibility

This replacement solution applies to certain configurations of ITALFORNI TK electric pizza ovens.

It is associated in particular with:

• TK 1C
• TK 1D
• TK 2C
• TK 2D

However, depending on the version and production year, the configuration may vary.

Therefore, always check the dimensions of the stones currently installed before ordering.

Technical Specifications

• Product: refractory deck stone
• Dimensions: 330 × 985 × 14 mm
• Width: 330 mm
• Length: 985 mm
• Thickness: 14 mm
• Position: deck / baking surface
• Application: professional electric pizza oven
• Associated brand: ITALFORNI
• Range: TK
• Use: part of a replacement solution
• Quantity of this stone for a complete deck: 2
• Complementary stone: 310 × 985 × 14 mm
• Total number of elements in the replacement configuration: 3
• Total deck surface: 970 × 985 mm

Why Use Three Stones Instead of Two?

The original deck uses two stones measuring 485 mm wide.

Therefore:

485 + 485 = 970 mm

Since this size is no longer manufactured, the total width must be divided between available stone sizes.

The replacement configuration uses:

330 + 330 + 310 = 970 mm

The total width therefore remains exactly the same.

In addition, all three stones have the same 985 mm length and 14 mm thickness.

Replacement Without Changing the Total Baking Surface

The purpose of this configuration is to keep the same overall deck dimensions.

The original surface measures:

970 × 985 mm

The replacement surface also measures:

970 × 985 mm

Therefore, only the distribution of the stones changes.

Instead of two wider stones, the deck now uses three narrower elements.

When Should the Complete Replacement Configuration Be Ordered?

If your oven still uses the 2 original 485 × 985 × 14 mm stones, the complete replacement configuration is required.

In that case, you need:

• 2 stones measuring 330 × 985 × 14 mm;
• 1 stone measuring 310 × 985 × 14 mm.

However, if your oven already uses the three-piece replacement configuration, you can replace only the damaged stone.

Check the Other Stones as Well

When one stone cracks or breaks, it is advisable to inspect the neighbouring elements.

All stones are exposed to the same heating and cooling cycles.

In particular, check for:

• cracks;
• breakage;
• damaged edges;
• surface wear;
• uneven levels between stones.

This helps determine whether only one element or several stones should be replaced.

Why Keep the 14 mm Thickness?

The thickness directly affects the height and stability of the baking surface.

A thicker stone could create a raised section. On the other hand, a thinner stone could sit lower than the neighbouring elements.

In addition, thickness influences the thermal behaviour of the deck.

For this reason, it is recommended to keep the original thickness of:

14 mm

Checks Before Ordering

Before ordering this stone, check:

• the exact oven model;
• the ITALFORNI TK range;
• the configuration currently installed;
• the width of this stone: 330 mm;
• the length: 985 mm;
• the thickness: 14 mm;
• whether the old 485 × 985 × 14 mm stones are still fitted;
• whether a 310 × 985 × 14 mm complementary stone is already present if the replacement configuration has already been installed.

These checks help reduce the risk of ordering the wrong size or quantity.

Installation

Before carrying out any work on the oven:

• allow the appliance to cool completely;
• disconnect the electrical power supply;
• remove the old stones carefully;
• clean the support surface;
• inspect the support area;
• position the new stones without forcing them;
• make sure all three elements sit correctly.

The stones should remain correctly positioned without excessive mechanical stress.

Handling Refractory Stones

Refractory stones withstand high temperatures, but they remain fragile when exposed to impact.

Therefore:

• avoid dropping them;
• avoid heavy impacts with the pizza peel;
• do not force them into position;
• never pour cold water onto a hot stone.

These precautions help extend their service life.

Fast Shipping and Reinforced Packaging

Refractory stones are especially vulnerable to impact during transport.

For this reason, ACRIVI uses reinforced and highly protective packaging, suitable for fragile refractory components.

In addition, we do our best to provide fast shipping, helping to reduce professional oven downtime.

Frequently Asked Questions

What are the dimensions of this stone?

This stone measures 330 × 985 × 14 mm.

What were the dimensions of the original stones?

The original configuration uses 2 stones measuring 485 × 985 × 14 mm.

What is the total surface of the original deck?

The two stones are each 485 mm wide.

Therefore:

485 + 485 = 970 mm

The total surface is 970 × 985 mm.

Why not reinstall two 485 × 985 × 14 mm stones?

Because this original size is no longer manufactured.

A three-piece replacement solution makes it possible to rebuild the same total surface.

What is the new configuration?

The replacement solution uses:

• 2 stones measuring 330 × 985 × 14 mm
• 1 stone measuring 310 × 985 × 14 mm

Does the total surface change?

No.

The new configuration gives:

330 + 330 + 310 = 970 mm

The surface therefore remains 970 × 985 mm.

How many 330 × 985 × 14 mm stones are required?

You need 2 stones of this size for a complete deck.

What is the complementary stone?

The complementary stone measures 310 × 985 × 14 mm.

It is available here:

Refractory Deck Stone 310 × 985 × 14 mm for Italforni TK

Can only one 330 × 985 × 14 mm stone be replaced?

Yes, if the oven already uses the three-piece replacement configuration and the other two stones are still in good condition.

What should be done if the oven still uses the two original stones?

In that case, replace them with the complete new configuration:

• 2 × 330 × 985 × 14 mm;
• 1 × 310 × 985 × 14 mm.