Spring for pizza oven door OEM 17X50 mm
Spring for pizza oven door OEM 17X50 mm 42,72 € (excl. VAT) 51,26 € (incl. VAT)
Back to products
OEM SG 99 G30 gas cylinder nozzle kit for professional pizza oven
OEM SG 99 Gas Cylinder Nozzle Kit – G30 72,00 € (excl. VAT) 86,40 € (incl. VAT)

OEM SG 69 Gas Cylinder Nozzle Kit – G30

SKU: KIT OEM SG69 B / 4

The OEM SG 69 Gas Cylinder Nozzle Kit – G30 is designed to replace the gas injectors in a compatible OEM SG 69 professional pizza oven operating on G30 gas at 28–30 mbar.

This 6-piece gas nozzle kit contains:

  • 2 × Ø0.95 mm jets for the central deck burner.
  • 2 × Ø1.15 mm jets for the left and right upper burners.
  • 1 × Ø0.22 mm pilot jet for the small ignition pilot burner.
  • 1 × Ø0.70 mm jet for the intermediate flame-transfer burner.

The OEM SG 69 pizza oven is equipped with a 606 × 913 × 25 mm refractory baking stone, which is not included in this nozzle kit and is available separately from ACRIVI.

Each injector has a specific orifice size and installation position. The original manufacturer’s gas configuration must therefore be respected.

Important: G30 gas cylinder version, 28–30 mbar. Do not confuse this kit with the G20 natural gas version or a 50 mbar configuration.

Before ordering, check the oven identification plate, gas type, operating pressure, original injector sizes and threads.

Installation, adjustment and safety checks must be performed by a qualified gas technician.

60,00 € (excl. VAT) 72,00 € (incl. VAT)

In stock

In stock

12 People watching this product now!

Accepted payment methods: 

Description

OEM SG 69 Gas Cylinder Nozzle Kit – G30

The OEM SG 69 gas cylinder nozzle kit is designed for the maintenance and repair of compatible OEM SG 69 professional gas pizza ovens.

This replacement kit is intended for the G30 gas cylinder configuration operating at 28–30 mbar, provided these specifications match the oven’s approved setup.

It contains 6 gas jets and injectors in four different orifice sizes.

The components are intended for the central deck burner, left and right upper burners, ignition pilot burner and intermediate flame-transfer burner.

Each injector meters the gas supplied to a specific burner.

Therefore, choosing the correct jet size and respecting the original installation position are essential for proper burner operation.

Complete 6-Piece OEM SG 69 Gas Nozzle Kit

The kit contains the following components:

  • 2 × Ø0.95 mm gas jets for the central deck burner.
  • 2 × Ø1.15 mm gas jets for the left and right upper burners.
  • 1 × Ø0.22 mm pilot jet for the small ignition pilot burner.
  • 1 × Ø0.70 mm gas jet for the intermediate flame-transfer burner.

Total: 6 gas jets and injectors in four different sizes.

Each jet is designed for a particular burner or ignition function.

For this reason, the injectors must not be interchanged between different burner positions.

Before fitting the replacement parts, the technician must also verify their threads, dimensions and compatibility with the original oven configuration.

2 × Ø0.95 mm Jets for the Central Deck Burner

The kit includes two Ø0.95 mm gas jets for the central deck burner.

The deck forms the lower section of the oven’s baking chamber.

Heat supplied to this area contributes to cooking the pizza dough and achieving the desired baking results.

The gas jets meter the fuel supplied to the burner according to the oven’s design.

Therefore, their orifice sizes must match the approved G30 configuration.

The OEM SG 69 kit contains two central deck burner jets, whereas the corresponding OEM SG 99 kit contains four.

This difference is important when selecting the correct replacement kit.

2 × Ø1.15 mm Jets for the Left and Right Upper Burners

The kit also includes two Ø1.15 mm gas jets for the upper burners:

  • 1 jet for the right-hand upper burner.
  • 1 jet for the left-hand upper burner.

These burners help heat the upper section of the pizza baking chamber.

They contribute to cooking the pizza surface and toppings according to the oven’s design.

However, their injector orifice sizes differ from those used for the central deck burner.

Consequently, the upper burner jets must not be mixed up with the deck burner jets.

1 × Ø0.22 mm Jet for the Small Ignition Pilot

The kit contains one Ø0.22 mm gas pilot jet for the small ignition pilot burner.

This component forms part of the oven’s ignition system.

Its purpose is to meter the gas supplied to the pilot flame.

The correct pilot jet specification is important for the operation of the system.

However, a pilot ignition fault is not necessarily caused by the injector.

The problem may also involve the ignition electrode, thermocouple, gas supply or another component.

A qualified gas technician should therefore diagnose the fault before replacing the jet.

1 × Ø0.70 mm Jet for the Intermediate Flame-Transfer Burner

The kit includes one Ø0.70 mm gas jet.

This injector is intended for the intermediate flame-transfer burner.

The intermediate burner helps transfer ignition between designated areas of the burner system, depending on the oven’s original design.

The injector meters the gas supplied to this burner.

As with the other components, the jet must be installed in its designated position.

It must not be replaced with a jet intended for the central deck, upper burners or ignition pilot.

OEM SG 69 Pizza Oven with 606 × 913 × 25 mm Refractory Stone

The OEM SG 69 professional pizza oven is equipped with a 606 × 913 × 25 mm refractory baking stone.

This stone forms the oven’s baking deck.

Its refractory material stores heat and transfers it to the pizza dough during baking.

The stone dimensions are:

  • Width: 606 mm
  • Depth: 913 mm
  • Thickness: 25 mm

These dimensions also provide useful information when identifying the OEM SG 69 oven and its replacement components.

Please note: the refractory stone is not included in the gas nozzle kit.

If you also need to replace the baking surface, discover our 606 × 913 × 25 mm refractory stone for the OEM SG 69 pizza oven, available separately from ACRIVI.

Difference Between OEM SG 69 and OEM SG 99 Nozzle Kits

The OEM SG 69 and OEM SG 99 are different professional pizza oven models.

For the G30 gas cylinder versions operating at 28–30 mbar described here, the main difference between their nozzle kits is the number of central deck burner jets.

The OEM SG 69 kit contains 6 pieces:

  • 2 × Ø0.95 mm central deck burner jets;
  • 2 × Ø1.15 mm upper burner jets;
  • 1 × Ø0.22 mm pilot jet;
  • 1 × Ø0.70 mm intermediate burner jet.

The OEM SG 99 kit contains 8 pieces, including four Ø0.95 mm central deck burner jets.

Therefore, these two replacement kits must not be treated as identical.

You can also view our OEM SG 99 Gas Cylinder Nozzle Kit – G30 to compare the two products.

G30 Gas Cylinder Version – 28–30 mbar

This OEM SG 69 gas nozzle kit is intended for an oven configuration using G30 gas at 28–30 mbar.

Before ordering, always check the oven identification plate.

Gas type and operating pressure must match the appliance’s approved configuration.

Different gas categories and operating pressures may require different nozzle sizes.

Therefore, this kit must not be confused with injectors designed for G20 natural gas or G30 at 50 mbar.

Compatibility with G31 propane must also be checked separately against the manufacturer’s specifications.

Do not assume that a nozzle kit is interchangeable simply because the oven model is the same.

Why Are the Correct Gas Injector Sizes Important?

Gas jets regulate the flow of gas into the burners.

Their orifice sizes are selected according to the burner design, fuel type and approved operating conditions.

An incorrectly sized injector may affect combustion and cause unsafe operating conditions.

Similarly, a damaged or obstructed jet may interfere with normal burner operation.

However, an unusual flame or heating problem can have several possible causes.

A qualified technician should check the injector, gas supply pressure, burner and other relevant components before deciding which parts need replacement.

When Should OEM SG 69 Gas Jets Be Replaced?

Over time, gas injectors may become blocked, contaminated or damaged.

When this happens, replacement may be necessary.

However, irregular burner operation does not automatically mean that all the jets need to be changed.

A professional inspection should establish the condition of the components and identify the cause of any malfunction.

Maintenance and replacement should follow the oven manufacturer’s instructions.

A fixed replacement interval should not be treated as a universal requirement without specific manufacturer guidance.

How to Check Compatibility Before Ordering

Before purchasing this nozzle kit, check the oven’s original specifications.

Pay particular attention to:

  • Oven manufacturer: OEM.
  • Model: SG 69.
  • Gas type: G30.
  • Operating pressure: 28–30 mbar.
  • Central deck burner: 2 × Ø0.95 mm jets.
  • Left and right upper burners: 2 × Ø1.15 mm jets.
  • Small ignition pilot: 1 × Ø0.22 mm jet.
  • Intermediate flame-transfer burner: 1 × Ø0.70 mm jet.
  • Oven refractory stone: 606 × 913 × 25 mm.

Also check the original injector threads, dimensions and mounting positions.

The refractory stone dimensions can help identify the oven, but they do not replace the technical checks required for the gas system.

If you are unsure, contact ACRIVI before ordering.

Spare Parts for Professional OEM Pizza Oven Maintenance

Professional gas pizza ovens require suitable maintenance to keep their burner systems operating as intended.

Gas injectors are among the components that may need inspection during servicing.

When replacement is necessary, the new components must match the oven’s approved technical specifications.

This 6-piece OEM SG 69 G30 nozzle kit contains the stated jets for the main heating and ignition functions.

It is intended for compatible ovens used in pizzerias, restaurants and professional kitchens.

Gas Injector Installation and Safety

Gas injectors form part of the oven’s gas supply and combustion system.

For this reason, replacing them requires professional technical expertise.

Before any work begins, the gas supply must be shut off and the oven taken out of service.

The appliance must also be allowed to cool completely.

Installation, adjustment and safety checks must be carried out exclusively by a qualified gas technician.

The technician must follow the manufacturer’s instructions and respect the correct position of each injector.

Never drill, enlarge or modify an injector orifice.

Do not interchange jets between different burners.

After replacement, all necessary gas-tightness, combustion and safety checks must be completed before the oven is returned to service.

OEM SG 69 G30 Nozzle Kit Technical Specifications

  • Product: gas nozzle and injector kit
  • Oven manufacturer: OEM
  • Oven model: SG 69
  • Application: professional gas pizza oven
  • Gas version: gas cylinder
  • Gas type: G30
  • Operating pressure: 28–30 mbar
  • Stated kit contents: 6 pieces
  • Central deck burner: 2 × Ø0.95 mm
  • Left and right upper burners: 2 × Ø1.15 mm
  • Small ignition pilot: 1 × Ø0.22 mm
  • Intermediate flame-transfer burner: 1 × Ø0.70 mm
  • Oven refractory stone: 606 × 913 × 25 mm
  • Refractory stone included: no
  • Injector threads and mounting dimensions: check against the original parts
  • Compatibility: OEM SG 69 in the corresponding approved G30 configuration
  • Installation: qualified gas technician

Buy Your OEM SG 69 Gas Nozzle Kit from ACRIVI

ACRIVI supplies spare parts for professional pizza oven maintenance and repair.

Looking for an OEM SG 69 gas cylinder nozzle kit?

This kit contains 6 gas jets and injectors for the deck burner, upper burners and ignition system.

The stated orifice sizes are Ø0.95 mm, Ø1.15 mm, Ø0.22 mm and Ø0.70 mm.

It is intended for the compatible G30 gas cylinder configuration at 28–30 mbar.

Before ordering, check your oven’s identification plate, original injector sizes and mounting specifications.

If you need assistance, contact ACRIVI with your oven model and technical details.

Always select correctly matched gas injectors and have installation and safety checks performed by a qualified professional.

Customer Testimonials