Refractory Stone 350 × 700 × 22 mm for Pizza Group Pizza Oven

This 350 × 700 × 22 mm refractory stone is designed to replace one section of the baking deck in numerous professional Pizza Group pizza ovens.

It is suitable for several electric ovens from the MASTER, PROFESSIONAL and PYRALIS ranges, as well as several gas ovens from the FLAME range.

Pizza Group OEM reference:

S0086029

Dimensions

Main specifications:

• Width: 350 mm
• Length: 700 mm
• Thickness: 22 mm
• Shape: rectangular
• Type: refractory baking-deck stone
• Application: professional pizza oven
• Compatible brand: Pizza Group
• OEM reference: S0086029

Before ordering, always compare these dimensions with the stone currently installed in your oven.

Pizza Group MASTER compatibility

This stone is documented for several Pizza Group MASTER electric ovens:

• MASTER D4
• MASTER D6L
• MASTER D8
• MASTER D12L

Reference S0086029 is used as a refractory baking-deck component on these appliances.

Pizza Group PROFESSIONAL D compatibility

Compatible with:

• PROFESSIONAL D4
• PROFESSIONAL D6L
• PROFESSIONAL D8
• PROFESSIONAL D12L

Pizza Group PROFESSIONAL DS compatibility

Compatible with:

• PROFESSIONAL DS4
• PROFESSIONAL DS6L
• PROFESSIONAL DS8
• PROFESSIONAL DS12L

Pizza Group PROFESSIONAL M compatibility

Compatible with:

• PROFESSIONAL M4
• PROFESSIONAL M6L
• PROFESSIONAL M8
• PROFESSIONAL M12L

Pizza Group PROFESSIONAL MS compatibility

Compatible with:

• PROFESSIONAL MS4
• PROFESSIONAL MS6L
• PROFESSIONAL MS8
• PROFESSIONAL MS12L

Pizza Group PYRALIS D compatibility

This refractory stone is also documented for several PYRALIS ovens:

• PYRALIS D4
• PYRALIS D6L
• PYRALIS D8
• PYRALIS D12L

Pizza Group PYRALIS DS compatibility

Compatible with:

• PYRALIS DS4
• PYRALIS DS6L
• PYRALIS DS8
• PYRALIS DS12L

Pizza Group PYRALIS M compatibility

Compatible with:

• PYRALIS M4
• PYRALIS M6L
• PYRALIS M8
• PYRALIS M12L

Pizza Group PYRALIS MS compatibility

Compatible with:

• PYRALIS MS4
• PYRALIS MS6L
• PYRALIS MS8
• PYRALIS MS12L

Compatibility with Pizza Group FLAME gas ovens

The same refractory stone is also documented for several professional Pizza Group gas pizza ovens:

• FLAME 4
• FLAME 6
• FLAME 9

It can therefore be used in both compatible electric Pizza Group ovens and several compatible gas models.

Pizza Group OEM reference S0086029

The manufacturer reference associated with this stone is:

S0086029

This reference is an important identifier when selecting the correct replacement part.

However, it is still recommended to check the physical dimensions of the original stone before ordering.

Function of the refractory stone

The refractory stone forms an essential part of the pizza oven baking deck.

During heating, it stores heat and transfers it directly to the pizza dough.

It helps to:

• stabilise baking temperature;
• efficiently transfer heat to the underside of the pizza;
• promote even baking;
• retain heat between baking cycles;
• provide a suitable surface for direct baking.

When should the refractory stone be replaced?

Replacement may be necessary if the stone has:

• major breakage;
• a missing section;
• an unstable crack;
• severe surface deterioration;
• a height difference compared with adjacent stones;
• poor stability in its support.

A small stable crack does not necessarily require immediate replacement.

Checks before ordering

Before ordering, check:

• width: 350 mm
• length: 700 mm
• thickness: 22 mm
• OEM reference: S0086029, if available
• exact oven model
• number of stones forming the baking deck
• orientation of the stones
• shape of the original component

Model compatibility is useful, but a visual and dimensional comparison is also recommended.

Installation

Before any work:

• disconnect the electrical supply;
• shut off the gas supply on gas ovens;
• allow the appliance to cool completely;
• carefully remove the damaged stone;
• remove fragments and debris;
• clean the supports;
• install the replacement stone without forcing it.

The stone should sit correctly and securely in its position.

First heat-up

After replacement, bring the oven up to temperature gradually.

Avoid severe thermal shock.

Never pour cold water onto a hot refractory stone.

Maintenance

Allow the stone to cool naturally before cleaning.

Then remove residues with a suitable brush.

Avoid soaking the stone with water or cleaning products.

Predominantly dry cleaning is generally preferable.

Fast shipping

This stone is prepared for fast shipping to help minimise downtime for your professional pizza oven.

Reinforced and highly protective packaging

Refractory stones are fragile during transport.

We therefore use reinforced, highly protective packaging specifically suited to refractory components.

Particular attention is given to:

• securing the stone;
• protecting the surfaces;
• protecting the corners;
• protecting the edges;
• limiting movement inside the parcel;
• reinforcing the outer packaging.