Refractory Stone 350 × 410 × 14 mm for Professional Pizza Oven

This 350 × 410 × 14 mm refractory stone is designed to replace a worn, cracked or broken deck stone in a compatible professional pizza oven.

It is suitable for equipment using a stone with the same dimensions, thickness and installation configuration.

Dimensions

• Length: 410 mm
• Width: 350 mm
• Thickness: 14 mm
• Shape: rectangular

Before ordering, carefully measure the original stone.

Reference

AVG350/410/14

Compatibility

This stone is suitable for professional pizza ovens using a 350 × 410 × 14 mm refractory stone.

Compatibility also depends on the oven’s installation configuration.

Before ordering, check:

• the exact dimensions of the original stone;
• the 14 mm thickness;
• the shape of the stone;
• its position inside the baking chamber;
• any cut-outs, holes or special shapes.

Function of the Refractory Stone

The refractory stone absorbs heat produced by the oven and releases it gradually during baking.

It helps to:

• transfer heat efficiently to the base of the pizza;
• provide even baking of the dough;
• stabilise the temperature of the baking surface;
• maintain good thermal inertia between baking cycles.

When Should the Stone Be Replaced?

Replacement is recommended when the stone shows:

• a break;
• a major crack;
• significant crumbling;
• instability in its mounting position;
• excessive surface wear.

Stains and colour changes caused by normal use are common and do not, on their own, require replacement.

Care Instructions

To help preserve the refractory stone:

• avoid impacts;
• avoid sudden temperature changes;
• never pour cold water onto a hot stone;
• allow the stone to cool naturally before handling;
• remove dry residue with a suitable brush or scraper.

Protected Shipping

Refractory stones are particularly sensitive to impacts during transport.

For this reason, each stone is prepared with reinforced and highly protective packaging, specifically suited to the shipment of refractory products.