Refractory Stone 500 × 600 × 14 mm for Pizza Group Pizza Oven

This 500 × 600 × 14 mm refractory stone is designed to replace one baking-deck element in several professional electric Pizza Group pizza ovens.

It corresponds to manufacturer reference:

Pizza Group A95OO65003

It is also associated with manufacturer reference 4102840 and spare-part code 850059.

In spare-parts catalogues, the dimensions may be listed as:

600 × 500 × 11+3 mm

This corresponds to the same 500 × 600 mm stone with a total thickness of 14 mm.

Technical specifications

• Width: 500 mm
• Length: 600 mm
• Total thickness: 14 mm
• Catalogue configuration: 11+3 mm
• Shape: rectangular
• Type: refractory baking-deck stone
• Application: professional electric pizza oven
• Brand: Pizza Group
• OEM reference: A95OO65003
• Other manufacturer reference: 4102840
• Spare-part code: 850059

Pizza Group reference A95OO65003

The main manufacturer reference for this refractory stone is:

A95OO65003

Please note that the reference contains two letter O characters.

This reference identifies a refractory stone listed in spare-parts catalogues as:

600 × 500 × 11+3 mm

The order of the dimensions may vary between catalogues. It corresponds to the same:

500 × 600 × 14 mm

format.

Pizza Group BABY compatibility

This stone is compatible with the following Pizza Group electric pizza ovens:

• BABY
• BABY 2T
• BABY 3T

It is used as a replacement refractory element in the baking deck of these ovens.

Pizza Group FG2 compatibility

Compatible with:

• FG2-50A
• FG2-50R

Before replacement, it is still recommended to compare the reference and dimensions with the stone currently installed.

Pizza Group FGM2 compatibility

Also compatible with:

• FGM2-50A
• FGM2-50R

These models use the Pizza Group refractory stone corresponding to reference A95OO65003.

Full list of compatible models

Documented compatibility:

• Pizza Group BABY
• Pizza Group BABY 2T
• Pizza Group BABY 3T
• Pizza Group FG2-50A
• Pizza Group FG2-50R
• Pizza Group FGM2-50A
• Pizza Group FGM2-50R

11+3 mm configuration

The stone is listed with the following thickness configuration:

11+3 mm

for a total thickness of:

14 mm

This specification helps distinguish it from other Pizza Group refractory elements with similar dimensions but a different construction.

Function of the refractory stone

The refractory stone forms an essential part of the pizza oven baking deck.

During heating, it stores heat and transfers it directly to the pizza dough during baking.

It helps to:

• stabilise baking-deck temperature;
• efficiently transfer heat to the underside of the pizza;
• promote even baking;
• retain thermal energy between baking cycles;
• provide a suitable surface for direct baking.

When should the stone be replaced?

A refractory stone is exposed to repeated heating and cooling cycles.

Replacement may become necessary if the stone has:

• major breakage;
• a missing section;
• an unstable crack;
• severe surface deterioration;
• a height difference compared with adjacent stones;
• poor stability in its support.

A small stable crack does not necessarily require immediate replacement.

Checks before ordering

Before ordering, check:

• dimensions: 500 × 600 mm
• total thickness: 14 mm
• configuration: 11+3 mm
• reference: A95OO65003
• exact oven model
• stone position in the baking deck

The manufacturer reference remains one of the most reliable ways to identify the correct spare part.

Installation

Before carrying out any work:

• disconnect the electrical supply;
• allow the oven to cool completely;
• carefully remove the damaged stone;
• remove fragments and debris;
• inspect the supports;
• clean the seating area;
• install the new stone without forcing it.

The stone should sit correctly without excessive stress.

First heat-up

After replacement, bring the oven up to temperature gradually.

Avoid severe thermal shock.

Never pour cold water onto a hot refractory stone.

Maintenance

Allow the stone to cool naturally before cleaning.

Then remove dry residues with a suitable brush.

Avoid soaking the stone with water or cleaning products.

Predominantly dry cleaning is recommended.

Fast shipping

This stone is prepared for fast shipping to help minimise downtime for your professional pizza oven.

Reinforced and highly protective packaging

Refractory stones are naturally fragile during transport.

This replacement part is therefore packed using reinforced, highly protective packaging specifically suited to professional refractory components.

Particular attention is given to:

• securing the stone;
• protecting the surfaces;
• protecting all four corners;
• protecting the edges;
• limiting movement inside the parcel;
• reinforcing the outer packaging.