230 V 1250 W Heating Element for Empero and GGM Gastro Pizza Oven

This 230 V – 1250 W heating element is designed for compatible professional electric rotating pizza ovens sold under the Empero and GGM Gastro brands.

It corresponds to the Empero manufacturer reference:

M.ELK-RZS-BRU-SPO-001

It is compatible in particular with the Empero EMP.SPO.01 and the GGM Gastro SPOE01 and SPOE01N pizza ovens.

Main specifications

• Type: heating element
• Voltage: 230 V
• Power: 1250 W
• Dimensions: 129 × 477 × 20 mm
• Application: professional electric pizza oven
• Oven type: rotating-deck pizza oven
• Empero reference: M.ELK-RZS-BRU-SPO-001

Empero compatibility

This heating element is intended for:

• Empero EMP.SPO.01

Empero technical documentation identifies a 230 V – 1250 W heating element under reference M.ELK-RZS-BRU-SPO-001 for this professional rotating pizza oven.

GGM Gastro compatibility

This heating element is also compatible with:

• GGM Gastro SPOE01
• GGM Gastro SPOE01N

These ovens use a 1250 W heating element with corresponding specifications and dimensions.

Before ordering, we recommend comparing the replacement part with the heating element currently installed in the oven.

Dimensions

Heating element dimensions:

• Width: 129 mm
• Length / depth: 477 mm
• Height: 20 mm

Overall dimensions:

129 × 477 × 20 mm

These measurements are important when confirming compatibility before replacement.

1250 W power

The heating element has a rated power of:

1250 W

The power rating must match the original element.

A heating element with the same shape but a different power rating should not automatically be considered compatible.

230 V supply

This heating element is designed to operate at:

230 V

Always check the voltage before ordering.

Different voltage versions may exist depending on the market or oven configuration.

Function of the heating element

The heating element converts electrical energy into heat and contributes to bringing the oven up to temperature and maintaining the required cooking temperature.

A defective heating element may cause:

• insufficient temperature;
• slow heat-up;
• uneven cooking;
• reduced heating power;
• one section of the oven no longer heating;
• complete loss of heat from the affected circuit.

Check the dimensions before ordering

Before ordering, compare the original heating element with these dimensions:

129 × 477 × 20 mm

Also check:

• overall shape;
• position of the electrical connections;
• mounting points;
• terminal orientation;
• voltage;
• power rating.

Production-series variations

Small construction differences may exist between different production series.

We therefore recommend checking:

• exact oven model;
• serial number;
• heating element dimensions;
• shape;
• connections;
• mounting system.

A visual comparison with the removed original element is also recommended.

Checks before ordering

Before ordering, verify:

• voltage: 230 V;
• power: 1250 W;
• dimensions: 129 × 477 × 20 mm;
• Empero reference: M.ELK-RZS-BRU-SPO-001;
• exact oven model;
• heating element shape;
• connection position;
• mounting system.

Diagnosis

If the oven is no longer heating correctly, the heating element may not be the only possible cause.

Also check:

• electrical supply;
• wiring;
• connections;
• contactors;
• power relays;
• thermostats;
• temperature sensors;
• electronic controls;
• other heating elements in the oven.

An electrical continuity test can help confirm whether the heating element is defective before replacement.

Installation

Before any work:

• completely disconnect the electrical supply;
• check that no voltage is present;
• allow the oven to cool;
• identify the wiring before removal;
• inspect cables and terminals.

After replacement:

• check all electrical connections;
• verify the mounting points;
• make sure the heating element is correctly positioned;
• bring the oven up to temperature gradually;
• check normal oven operation.

Installation by a qualified technician is recommended for professional equipment.