Refractory Stone for Pizza Oven in Two Pieces

This refractory stone for pizza oven measures 740 × 726 × 19 mm in total. It consists of two refractory stones measuring 740 × 363 × 19 mm each. Therefore, the two pieces form a complete cooking surface of 740 × 726 mm.

The refractory stone plays an essential role in pizza baking. In fact, it stores heat and gradually transfers it to the dough. As a result, it helps provide even cooking and a crispy pizza base.

Over time, however, refractory stones can crack, wear out or break. In this case, replacing the oven floor helps restore a suitable cooking surface.

Refractory Stone in Two Pieces

This refractory stone for pizza oven consists of two separate pieces. This design makes handling and installation inside the oven easier.

Each stone measures:

740 × 363 × 19 mm

Once the two stones are installed side by side, they form an oven floor measuring:

740 × 726 × 19 mm

In addition, the two-piece design makes it easier to replace a damaged oven floor.

Compatibility

This refractory stone is suitable in particular for the Morice No. 1 pizza oven equipped with a 19 mm thick oven floor.

⚠️ Please note: the Morice No. 1 oven is also available with a different floor thickness.

Therefore, always check your original stone before ordering.

This version has the following dimensions:

• Total width: 740 mm
• Total depth: 726 mm
• Thickness: 19 mm
• Number of stones: 2
• Dimensions of each stone: 740 × 363 × 19 mm

Replacing the Pizza Oven Floor

When your old stone has significant cracks, breaks or advanced wear, replacing it can help improve cooking performance.

First, carefully remove the old stones. Then, clean the surface where the new stones will be installed.

Next, place the two refractory stones inside the oven. Finally, check their position before putting the appliance back into operation.

Technical Specifications

Advantages

• Refractory stone for pizza oven
• Set consisting of 2 stones
• Total dimensions of 740 × 726 × 19 mm
• Stones measuring 740 × 363 × 19 mm
• Good heat retention
• Even heat transfer
• Helps provide uniform cooking
• Ideal for replacing a worn oven floor
• Two-piece design for easier handling

Important Before Ordering

⚠️ Before ordering, carefully measure your original oven floor.

In particular, check the 740 mm width, 726 mm depth and, most importantly, the 19 mm thickness.

The Morice No. 1 oven can also be equipped with a 30 mm thick oven floor. This product page concerns only the 19 mm version.

Refractory stones are fragile. Therefore, handle them carefully during transport, installation and replacement.