Moretti Forni Refractory Stone 526 × 660 × 14 mm

This 526 × 660 × 14 mm refractory stone is mainly intended as a replacement deck stone for several professional MORETTI FORNI pizza ovens.

It is used on various configurations within the iD, PD, PM and PIZZY ranges.

It can also be fitted to selected Cookmax models using the same stone dimensions and configuration.

Dimensions

• Length: 660 mm
• Width: 526 mm
• Total thickness: 14 mm
• Configuration: 11 + 3 mm
• Shape: rectangular

Before ordering, always compare these dimensions with the stone currently installed in your oven.

Moretti Forni Compatibility

This stone is compatible in particular with the following Moretti Forni electric pizza ovens:

• Moretti Forni iD 105.105
• Moretti Forni iD 105.105 MD
• Moretti Forni iD 105.65
• Moretti Forni iD 105.65 MD
• Moretti Forni iD 65.105
• Moretti Forni iD 65.105 MD
• Moretti Forni iD 72.72
• Moretti Forni PD 105.105
• Moretti Forni PD 105.65
• Moretti Forni PD 65.105
• Moretti Forni PIZZY MD 105.105
• Moretti Forni PIZZY MD 105.65
• Moretti Forni PIZZY MD 65.105
• Moretti Forni PM 105.105
• Moretti Forni PM 105.65
• Moretti Forni PM 65.105

The following additional Moretti references / configurations are also associated with this stone:

• MFID65.105D
• MFPD105.65D

Cookmax Compatibility

This stone is also listed for selected Cookmax equipment:

• Cookmax 531003
• Cookmax 531004
• Cookmax 531005
• Cookmax 531006

Refractory Deck Stone for Professional Pizza Ovens

The refractory stone forms the baking surface of the oven.

During heating, it stores thermal energy and releases it progressively to the dough.

This helps to:

• transfer heat efficiently to the base of the pizza;
• provide even baking of the dough;
• stabilise the deck temperature;
• maintain good thermal inertia between baking cycles.

When Should the Stone Be Replaced?

Replacement is recommended when the stone shows:

• a break;
• a major crack;
• significant crumbling;
• severe surface deterioration;
• poor stability in its mounting position.

Stains and colour changes caused by normal baking are common and do not, by themselves, require replacement.

Checks Before Ordering

Before ordering, check:

• the oven brand and exact model;
• dimensions 526 × 660 mm;
• total thickness 14 mm;
• 11 + 3 mm configuration;
• shape of the original stone;
• installation position inside the baking chamber.

The replacement stone should fit in place of the original without being forced.

Care Advice

To help preserve the refractory stone:

• avoid mechanical impacts;
• avoid sudden temperature changes;
• never pour cold water onto a hot stone;
• allow it to cool naturally before handling;
• remove dry residue with a suitable brush or scraper.

Protected Shipping

Refractory stones are particularly sensitive to impact during transport.

Each stone is therefore prepared with reinforced and highly protective packaging, specifically suited to shipping refractory products.