Ignition plug for GGF gas pizza oven pilot

The ignition plug for GGF gas pizza ovens is an original replacement part designed for several professional GGF pizza oven models.

It produces the spark required to ignite the pilot flame of the gas system. This ignition plug is suitable for GGF G4, G6, G9, G4/72, G6/72, G6/108 and G9/108 ovens. It is also compatible with certain OEM SG-69-S and SG-99-S gas pizza ovens.

Compatibility

This ignition plug is compatible with the following models.

GGF pizza ovens

• GGF G4
• GGF G6
• GGF G9
• GGF G4/72
• GGF G6/72
• GGF G6/108
• GGF G9/108

OEM pizza ovens

• OEM SG-69-S
• OEM SG-99-S

Before ordering, always check the exact oven model and compare the ignition plug with the original part.

⚠️ Ignition cable connection: very important

When connecting the ignition cable to the plug, it is essential to slide the cable insulation over the white part of the ignition plug.

This step is essential for proper electrical insulation.

If the insulation is not positioned correctly, the spark may occur at the rear of the plug instead of at the intended point. As a result, ignition failures or difficulties lighting the pilot flame may occur.

Therefore, always check that the insulation is correctly positioned before putting the oven back into operation.

Features

• Type: ignition plug
• Application: professional gas pizza oven
• Brands: GGF and OEM
• Part: original GGF replacement part
• Use: pilot flame ignition system
• Compatibility: GGF G4, G6, G9, G4/72, G6/72, G6/108, G9/108, OEM SG-69-S and SG-99-S

Advice before replacement

First, shut off the gas supply and allow the appliance to cool before carrying out any work.

Next, check the condition of the ignition plug, ignition cable and connections.

Finally, after installation, carefully check that the cable insulation is correctly positioned over the white part of the ignition plug.