Piezo ignition cable for GGF pizza ovens – 500 mm

The piezo ignition cable for GGF pizza ovens is an original GGF replacement part designed for the ignition system of professional gas pizza ovens.

This cable connects the piezo igniter to the ignition plug and transfers the impulse required to create the spark. As a result, it helps ignite the pilot flame.

Dimensions and connections

• Cable length: 500 mm
• Piezo igniter connection: 2.4 mm terminal
• Ignition plug connection: 4 mm terminal
• Type: piezo ignition cable
• Original part: GGF

Before ordering, always compare the length and connections with the original cable.

Compatibility

GGF pizza ovens

• GGF G4
• GGF G6
• GGF G9
• GGF G4/72
• GGF G6/72
• GGF G6/108
• GGF G9/108

OEM pizza ovens

• OEM SG69
• OEM SG99

Operation with the ignition plug

The cable connects the piezo igniter to the ignition plug. When the igniter is activated, the cable transfers the impulse to the plug.

The ignition plug then creates the spark required to ignite the pilot flame.

⚠️ Connection to the ignition plug

During installation, check that the 4 mm terminal is correctly connected to the ignition plug.

In addition, the cable insulation must be correctly positioned over the white part of the ignition plug. Otherwise, the spark may occur in the wrong location and cause ignition problems.

Features

• Type: piezo ignition cable
• Length: 500 mm
• Piezo igniter connection: 2.4 mm terminal
• Ignition plug connection: 4 mm terminal
• Brand: GGF
• Part: original GGF replacement part
• GGF compatibility: G4, G6, G9, G4/72, G6/72, G6/108 and G9/108
• OEM compatibility: SG69 and SG99