OEM Heating Element 875W 230V OM20.00102 M4 – 635L Series

OEM 875W 230V OM20.00102 Heating Element for 635L Series

The OEM 875W 230V OM20.00102 heating element is a replacement heating component designed for professional OEM 635L series equipment.

It can be used to replace a worn, damaged or faulty heating element that no longer heats correctly.

With a power rating of 875 W at 230 V, this element corresponds to reference OM20.00102.

It has a total length of 830 mm, an internal length of 675 mm and a width of approximately 120 mm.

The electrical connection uses M4 fixing terminals. Before ordering, always check that the original heating element uses the same connection type.

OEM Heating Element for 635L Series

The heating element is an essential part of the heating system in professional electrical equipment.

It converts electrical energy into heat and contributes directly to bringing the appliance up to the required operating temperature.

The OEM OM20.00102 heating element is intended for 635L series equipment using this specific reference.

It provides a suitable replacement solution for a defective heating element without requiring replacement of the complete appliance.

875 W Power at 230 V

This heating element operates at 875 W with a 230 V supply.

These electrical specifications must match the component currently installed in the equipment.

A heating element with a similar shape may have different power, dimensions or electrical connections.

Before purchase, always check:

• reference;
• power;
• voltage;
• total length;
• internal length;
• width;
• electrical connection;
• terminal fixing size;
• equipment series.

For this product, the reference to identify is OM20.00102.

Dimensions of OM20.00102 Heating Element

This heating element has the following specifications:

• Total length: 830 mm
• Internal length: 675 mm
• Width: approximately 120 mm
• Power: 875 W
• Voltage: 230 V
• Electrical connection: M4
• Reference: OM20.00102
• Series: 635L

These details make it easier to compare the replacement part with the element currently installed in your equipment.

As the width is stated as approximately 120 mm, we recommend checking the original part directly before ordering.

M4 Electrical Connection

The OEM OM20.00102 heating element uses an M4 fixing connection for the electrical terminals.

This detail is important when replacing the component.

Before purchase, check that the old heating element uses the same type of connection.

The M4 fixing must be compatible with the cables, terminals and connection hardware fitted to the equipment.

This check helps reduce the risk of incompatibility during installation.

Compatible with OEM 635L Series

This heating element is intended for OEM 635L series equipment using reference OM20.00102.

The manufacturer reference remains one of the safest ways to confirm compatibility.

Do not choose a heating element based only on its appearance.

Always compare the following:

• Brand: OEM
• Reference: OM20.00102
• Power: 875 W
• Voltage: 230 V
• Total length: 830 mm
• Internal length: 675 mm
• Width: approximately 120 mm
• Electrical connection: M4
• Series: 635L

Why Replace a Professional Heating Element?

Heating elements regularly operate at high temperatures.

During use, they undergo repeated heating and cooling cycles. Over time, they can lose efficiency or stop working completely.

A faulty heating element can cause:

• slower heating;
• insufficient heating power;
• uneven temperature;
• reduced performance during service;
• a heating zone that no longer works correctly;
• complete failure of the heating element.

Replacing the heating element allows you to repair the faulty component directly.

Extend the Service Life of Your OEM Equipment

A failed heating element does not necessarily mean the entire appliance must be replaced.

If the other components are still operating correctly, replacing only the heating element may be sufficient.

This targeted repair can help:

• keep the existing equipment in service;
• reduce repair costs;
• replace only the faulty component;
• restore heating performance;
• extend the service life of the appliance;
• reduce equipment downtime.

For Professional Catering Equipment

The OEM 875W 230V OM20.00102 heating element is designed for professional equipment.

It may be suitable for:

• pizzerias;
• restaurants;
• hotels;
• snack bars;
• professional kitchens;
• catering establishments;
• maintenance technicians;
• professional equipment repair companies.

Equipment used every day must maintain reliable and consistent heating performance.

Replacing a worn heating element helps preserve the performance of the appliance.

Main Specifications

• Product: heating element
• Brand: OEM
• Reference: OM20.00102
• Power: 875 W
• Voltage: 230 V
• Total length: 830 mm
• Internal length: 675 mm
• Width: approximately 120 mm
• Electrical connection: M4 fixing
• Compatible series: 635L
• Application: professional equipment
• Use: repair and maintenance
• Type: replacement heating component

Check Compatibility Before Ordering

Before ordering this OEM 875W 230V heating element, always check the specifications of the original part.

The reference should match:

OM20.00102

Also check:

• 875 W power;
• 230 V voltage;
• 830 mm total length;
• 675 mm internal length;
• approximately 120 mm width;
• M4 electrical connection;
• compatibility with the OEM 635L series.

If in doubt, compare the original heating element directly with these specifications.

Before carrying out any work, completely disconnect the equipment from the electrical supply. If necessary, have the installation carried out by a qualified technician.