Refractory Ceiling Stone 623 × 680 × 25 mm for ITALFORNI EC6

This 623 × 680 × 25 mm refractory ceiling stone is designed for the upper section of the ITALFORNI EURO CLASSIC EC6 professional pizza oven.

It corresponds to manufacturer reference ITALFORNI 59800129.

The oven ceiling uses 2 refractory stones of this type. Depending on the condition of the oven, you can therefore replace only one damaged stone or both stones.

Technical specifications

• Product: refractory ceiling stone
• Position: upper section / oven ceiling
• Dimensions: 623 × 680 × 25 mm
• Brand: ITALFORNI
• Compatible model: EURO CLASSIC EC6
• ITALFORNI reference: 59800129
• Quantity used in the oven: 2 stones
• Application: replacement of an upper refractory stone

Upper refractory stone for ITALFORNI EC6

This stone is not intended for the oven floor or lower baking deck.

It is specifically designed for the ceiling of the ITALFORNI EURO CLASSIC EC6 oven.

The upper section of the oven uses 2 stones measuring 623 × 680 × 25 mm.

Before ordering, check whether you need to replace:

• only one damaged stone;
• or both ceiling stones.

Checks before ordering

Before ordering, verify:

• the 623 mm dimension;
• the 680 mm dimension;
• the 25 mm thickness;
• the position of the stone in the oven ceiling;
• the ITALFORNI EURO CLASSIC EC6 model;
• the manufacturer reference 59800129.

This helps avoid confusion with the refractory stones used in the lower section of the oven.

Replacing the ceiling stone

Over time and after repeated heating cycles, a refractory stone may crack, break or show significant wear.

If only one of the two ceiling stones is damaged, you can replace only that stone.

However, if both stones are heavily worn, replacing both at the same time may be useful to fully restore the upper section of the oven.

Fast shipping and highly protective packaging

Refractory stones are particularly fragile during transport.

For this reason, Acrivi takes special care when preparing each shipment.

We use reinforced and highly protective packaging, specifically suited to the transport of fragile refractory stones.

In addition, we do our best to ensure fast shipping, helping to reduce downtime for your professional pizza oven.

FAQ

What are the dimensions of this stone?

The stone measures 623 × 680 × 25 mm.

Where is this stone installed?

It is installed in the upper section / ceiling of the oven.

Which oven is it designed for?

It is intended for the ITALFORNI EURO CLASSIC EC6 professional pizza oven.

What is the ITALFORNI reference?

The manufacturer reference is 59800129.

How many stones are used in the oven?

The oven ceiling uses 2 refractory stones measuring 623 × 680 × 25 mm.

Do both stones need to be replaced?

No. If only one stone is damaged, you can replace only that one. However, the condition of the second stone should also be checked.

Is this the bottom stone of the oven?

No. This stone is intended for the upper section / oven ceiling.

Is shipping fast?

Yes. Acrivi places strong emphasis on fast shipping.

How is the stone packaged?

It is shipped with reinforced and highly protective packaging, suitable for fragile refractory components.