Set of 75 Refractory Slats 49 × 590 × 14 mm for ITALFORNI TSB Conveyor Pizza Ovens

This set of 75 refractory slats measuring 49 × 590 × 14 mm is suitable for the conveyor system of ITALFORNI Tunnels series, 1-chamber TSB pizza ovens.

Each slat forms part of the conveyor surface. Therefore, the pizzas move through the baking chamber during operation.

The set contains 75 refractory slats. As a result, it is particularly suitable for a complete refurbishment or for replacing all the slats on the conveyor.

Complete replacement or individual replacement

Depending on the condition of the conveyor, you do not always need to replace every slat.

In addition, Acrivi also offers the following spare parts individually:

• Refractory slat 49 × 590 × 14 mm sold individually
• Support for refractory slat 590 × 49 × 14 mm

These parts belong to the same ITALFORNI TSB conveyor system.

Therefore, you can replace only worn or damaged parts. In addition, this avoids replacing the entire system unnecessarily.

Technical specifications

• Product: set of refractory slats for conveyor pizza oven
• Quantity: 75 slats
• Dimensions: 49 × 590 × 14 mm
• Width: 49 mm
• Length: 590 mm
• Thickness: 14 mm
• Application: conveyor system for professional pizza oven
• Compatibility: ITALFORNI Tunnels series, 1-chamber TSB
• Reference: AVG/75/49.590.14

Compatible spare parts

Refractory slat 49 × 590 × 14 mm sold individually

The 49 × 590 × 14 mm refractory slat is also available individually.

This option is useful when only one or a few slats are worn or damaged.

As a result, you can replace only the required parts without buying a complete set.

Reference: AVGR/49/590/14

Support for refractory slat

Acrivi also offers the matching support for 590 × 49 × 14 mm refractory slats separately.

Therefore, if a support is worn or damaged, you can replace it individually while keeping all other parts that are still in good condition.

Which option should you choose?

For a complete conveyor refurbishment, the set of 75 refractory slats is the most suitable option.

For a targeted repair, however, you can order only the number of individual slats required.

In addition, if a support is also worn or damaged, you can order it separately.

This way, you can adapt the repair to the actual condition of your conveyor pizza oven.

Compatibility

These parts are suitable for ITALFORNI Tunnels series, 1-chamber TSB conveyor pizza ovens.

However, before ordering, check:

• the exact oven model;
• the dimensions of the existing slats;
• the 49 mm width;
• the 590 mm length;
• the 14 mm thickness.

This helps reduce the risk of ordering an unsuitable spare part.

FAQ

How many slats are included in the set?

The set contains 75 refractory slats.

What are the dimensions of each slat?

Each slat measures 49 × 590 × 14 mm.

Can I buy a single refractory slat?

Yes. The 49 × 590 × 14 mm refractory slat is also available individually.

Is the slat support available separately?

Yes. Acrivi also offers the matching refractory slat support separately.

Which pizza ovens is this set suitable for?

This set is suitable for ITALFORNI Tunnels series, 1-chamber TSB conveyor pizza ovens.